Process Safety Management - 20 Elements Clause-wise Training Module
PowerPoint · 227 slides · English · Process Safety

Clause-wise theoretical training on the 20 PSM elements: OSHA 29 CFR 1910.119 elements 1-14 (each with regulatory text, interpretation, key requirements, principles and terminology) plus six supplementary elements (culture, leadership, risk management, asset integrity, safety-critical equipment, continuous improvement) drawn from CCPS RBPS, ISO 45001/31000, IEC 61511 and API standards. Includes source mapping, risk control hierarchy, layers of protection and a PSM life-cycle view.
By Saurabh Rawat · Published 2026-09-29 · Updated 2026-11-11
From the document
PROCESS SAFETY MANAGEMENT Process Safety Management (PSM) – 20 Elements Clause-wise theoretical training module Definitions · purpose · scope · regulatory basis · clause requirements and interpretation · key requirements · principles · relationship with process safety · terminology Elements 1–14: OSHA 29 CFR 1910.119, paragraphs (c)–(p) · Elements 15–20: supplementary, non-OSHA elements How This Module Is Organised Each of the 20 elements follows the same eleven-part sequence INTRODUCTION 1 Element title 2 Definition 3 Purpose 4 Scope 5 Regulatory basis 6 Clause-wise requirements 7 Clause-wise interpretation 8 Key requirements 9 Fundamental principles 10 Relationship with process safety 11 Important terminology Reading the clause slides Clause 1910.119(x) Items 6 and 7 are shown one clause per slide. The left panel gives the REQUIREMENT (regulatory text, paraphrased). The right panel gives the INTERPRETATION (explanatory). Related provision Parallel requirements outside 1910.119 (e.g., EPA 40 CFR 68) are labelled separately. Elements 15–20 (supplementary) These are not OSHA 1910.119 paragraphs. Each reference is labelled by type: regulatory, standard, code, guidance or concept. …
psm · process safety management · osha 1910.119 · pha · moc · mechanical integrity · pssr · incident investigation · compliance audit · ccps rbps
Read Process Safety Management - 20 Elements Clause-wise Training Module online
- Process Safety – Part 4: Risk Matrix, Risk Assessment and Risk Reduction
A 10-page illustrated learning resource explaining how risk matrices combine likelihood and consequence to rank process safety scenarios, evaluate residual risk, and identify when…
- IEC 61882:2016 – Hazard and Operability Studies (HAZOP Studies): Application Guide
IEC 61882:2016 provides guidance on conducting Hazard and Operability (HAZOP) studies using guide words to systematically identify deviations from design intent, examine their cau…
- Golden Rules of Process Safety for Nitrogen (N₂) – GR5
A process safety guideline covering five Golden Rules for managing hazards associated with nitrogen (N₂), including hazardous properties, equipment identification, prevention and…
- CCPS Monograph: Addressing High Consequence, Low Probability Risk Scenarios within a Risk Based Process Safety Framework
CCPS monograph addressing High Consequence, Low Probability (HCLP) risk scenarios within a Risk Based Process Safety framework. It examines the technical and cultural challenges a…
- Furnace Explosion and Fire at Shell Polymers – Investigation Report
A 70-page U.S. Chemical Safety and Hazard Investigation Board (CSB) investigation report on the June 4, 2025 furnace explosion and fire at Shell Polymers in Monaca, Pennsylvania.…
- Process Hazard Analysis (PHA) – Hazard Identification, Risk Assessment, What-If Analysis and HAZOP
A 103-slide training presentation on Process Hazard Analysis (PHA), covering hazard identification, risk concepts, experience-based and predictive assessment methods, What-If Anal…
- Hazardex – October 2026 Edition | Journal for Hazardous Area Environments
October 2026 edition of Hazardex, a journal covering process safety, hazardous-area environments, petrochemical safety, explosion protection, automation, robotics, alarms and indu…
- Tripping and Their Analysis of Thermal Power Plants
A project report examining thermal power plant tripping events, their root causes, equipment failures, human errors, and corrective actions to improve unit reliability and availab…