A 59-page Health and Safety Executive (HSE) guidance document explaining how to develop and implement process safety performance indicators to monitor major hazard risks. Covers leading and lagging indicators, risk control systems, six steps for performance measurement, management reporting, review processes, and a worked example for a major-hazard chemical storage site.
Clause-wise theoretical training on the 20 PSM elements: OSHA 29 CFR 1910.119 elements 1-14 (each with regulatory text, interpretation, key requirements, principles and terminolog…
A 70-page U.S. Chemical Safety and Hazard Investigation Board (CSB) investigation report on the June 4, 2025 furnace explosion and fire at Shell Polymers in Monaca, Pennsylvania.…
October 2026 edition of Hazardex, a journal covering process safety, hazardous-area environments, petrochemical safety, explosion protection, automation, robotics, alarms and indu…
A process safety guideline covering five Golden Rules for managing hazards associated with nitrogen (N₂), including hazardous properties, equipment identification, prevention and…
A 14-page visual presentation explaining key principles of Management of Change (MOC) in process safety, focusing on disciplined change control, risk review, emergency MOCs, opera…
A 5-page process safety insight explaining how HAZOP findings should progress into Bowtie analysis, LOPA, barrier assurance and ALARP decision-making. The document focuses on main…
A 106-page training presentation covering the fundamentals of Hazard and Operability (HAZOP) studies, including hazard identification, process deviations, guide words, causes, con…
This document provides a detailed introduction to Inherently Safer Design (ISD), a proactive risk management approach that focuses on eliminating or reducing hazards at their sour…
