Golden Rules of Process Safety for Nitrogen (N₂) – GR5
PDF · 4 pages · English · Process Safety

A process safety guideline covering five Golden Rules for managing hazards associated with nitrogen (N₂), including hazardous properties, equipment identification, prevention and mitigation controls, emergency response, and incident investigation.
By American Institute of Chemical Engineers (AIChE) Center for Chemical Process Safety (CCPS) Golden Rules of Process Safety for Nitrogen GR5 – Nitrogen, September 2026 · Published 2026-10-03 · Updated 2026-11-15
From the document
Golden Rules of Process Safety for: Nitrogen (N 2 ) GR5 – Nitrogen, September 2026 Copyright 2026 American Institute of Chemical Engineers www.aiche.org/ccps
Golden Rules for Nitrogen (N 2 ) Page 1 of 21 Table of Contents Golden Rule #1: ALWAYS understand and respect the hazardous properties of nitrogen ........................ 2 Golden Rule #2: ALWAYS identify the equipment where nitrogen is used and where it could present a hazard .......................................................................................................................................................... 7 Golden Rule #3: ALWAYS establish prevention and mitigation controls against unintended nitrogen releases ..................................................................................................................................................... 11 Golden Rule #4: ALWAYS develop and implement a response plan for uncontrolled nitrogen releases and exposures ........................................................................................................................................... 16 Golden Rule #5: ALWAYS investigate nitrogen incidents and near misses …
nitrogen safety · nitrogen · n2 · process safety · process safety management · chemical safety · gas safety · inert gas safety · nitrogen release · nitrogen exposure
Read Golden Rules of Process Safety for Nitrogen (N₂) – GR5 online
- Process Safety Management - 20 Elements Clause-wise Training Module
Clause-wise theoretical training on the 20 PSM elements: OSHA 29 CFR 1910.119 elements 1-14 (each with regulatory text, interpretation, key requirements, principles and terminolog…
- Process Safety – Part 4: Risk Matrix, Risk Assessment and Risk Reduction
A 10-page illustrated learning resource explaining how risk matrices combine likelihood and consequence to rank process safety scenarios, evaluate residual risk, and identify when…
- IEC 61882:2016 – Hazard and Operability Studies (HAZOP Studies): Application Guide
IEC 61882:2016 provides guidance on conducting Hazard and Operability (HAZOP) studies using guide words to systematically identify deviations from design intent, examine their cau…
- CCPS Monograph: Addressing High Consequence, Low Probability Risk Scenarios within a Risk Based Process Safety Framework
CCPS monograph addressing High Consequence, Low Probability (HCLP) risk scenarios within a Risk Based Process Safety framework. It examines the technical and cultural challenges a…
- Furnace Explosion and Fire at Shell Polymers – Investigation Report
A 70-page U.S. Chemical Safety and Hazard Investigation Board (CSB) investigation report on the June 4, 2025 furnace explosion and fire at Shell Polymers in Monaca, Pennsylvania.…
- Process Hazard Analysis (PHA) – Hazard Identification, Risk Assessment, What-If Analysis and HAZOP
A 103-slide training presentation on Process Hazard Analysis (PHA), covering hazard identification, risk concepts, experience-based and predictive assessment methods, What-If Anal…
- Hazardex – October 2026 Edition | Journal for Hazardous Area Environments
October 2026 edition of Hazardex, a journal covering process safety, hazardous-area environments, petrochemical safety, explosion protection, automation, robotics, alarms and indu…
- Key Principles of Process Safety: Management of Change (MOC)
A 14-page visual presentation explaining key principles of Management of Change (MOC) in process safety, focusing on disciplined change control, risk review, emergency MOCs, opera…